Front Blades  

  a) - 2 way front snow blade:

  • 9 foot blade width, "U" style snow blade

  •  standard 2 way (up/down) hydraulic function

  • safety spring trip mechanism with adjustable tension, and limit chains

  •  blade system is mounted to track wrap-around frame, NOT to tractor housings

  b - 4 way front snow blade:

  •  9 foot blade width, "U" style snow blade

  •  4 way operation;  up/down, 2 way tilt (off horizontal axis), single lever joystick control

  • safety spring trip mechanism with adjustable tension, and limit chains

  • blade system is mounted to track wrap-around frame, NOT to tractor housings

  c - 6 way front blade:

  • 9 foot blade width, "U" style snow blade

  • 6 way blade;  up/down, 2 way tilt and 2 way angle, single lever joystick control

  • blade system is mounted to track wrap-around frame, NOT to tractor housings

  • hydraulic relief safety protection

  D - 8 way front blade:

  • 9 foot blade width, "U" style snow blade

  • 6 way blade;  up/down, 2 way tilt and 2 way angle, 2-way roll (includes wide blade skid shoe), single lever joystick control

  • blade system is mounted to track wrap-around frame, NOT to tractor housings

  • hydraulic relief safety protection

  e- Joystick & valve "danfoss" upgrade replaces standard cable joystick & valve:

  • installation of "Danfoss" electrohydraulic valve and electronic joystick 

  • X (up/down) & Y (horizontal tilt) axis' are proportional

  • angle and tilt are "momentary" thumb-buttons mounted on joystick face

  • adjustable positioning to suit operator, mounted on seat to follow seat movement

  • nicer feel than cable valve, shorter and "tighter" lever "throw"

  • eliminates cable controls and possibility of cable freeze-up

10060030.jpg (67138 bytes) 6way_2-sharpflare.jpg (61251 bytes)
2-way with Spring-Trip 6-way Blade 8-way blade Standard cable-style joystick valve optional "Danfoss" electronic joystick

LARGE Brush guard

Protects cab front worklights & flashers, windshield wiper blade, and roof beacon.  The guard extends past the rear of the roof so branches clear rear worklights.

large brush guard - 2001-g-shaded.jpg (44410 bytes) large brush guard - 2001-c-shaded.jpg (43300 bytes)
TM brushguard TM brushguard TSA brushguard TSA brushguard

 

2nd Passenger door - for "TM" series only

 For "TM" series only:  A “2nd passenger door” is available for training purposes.  It consists of a cab extension built into the door frame, with a comfortable seat built in.  The passenger sits perpendicular to the driver and can easily see how the groomer is being operated, with unobstructed view towards both the front and back of the groomer.  This door/seat can be installed on either side of the cab.  The door remains fully functional.  With a large glass area, the operator’s view is not affected.  The door comes with an additional heavy-duty safety latch (over center, with locking pin) to prevent accidental opening while operating. As of the 2001 season, the 2nd passenger door option comes with a brush guard to protect front and side windows.

option-pass door 2.jpg (62949 bytes)   2ndseat.jpg (28136 bytes)   options-door3.jpg (58180 bytes)
 TM "Passenger Door"

Note:  "TSA" series groomers come standard with a factory installed "training seat" with seat belt.  When not in use this seat folds down to become a dual cup-holder and table surface.
TSA cab with training seat

HYDRAULIC WINCH kit

winch.jpg (24085 bytes) 

  • A 14,000 pound capacity hydraulic winch can be mounted at the front of the groomer.

  • The complete mounting bracket is "quick-attach", can be easily installed or removed.

Drag warning light kit

  • A light bar is mounted at the back of the drag, with the following functions; 

  • Two outer red warning lights, which emulate the tractor’s warning lights ie:  hazard or signal.

  • One center amber flashing light - when tractor clearance lights are off., the amber light flashes (independent of red warning lights).  When the tractor’s clearance/headlights are on, amber light goes off..

  • One halogen work light to light the trail behind drag.

  • Two additional red reflectors (facing rearwards)

  • Slow Moving Sign mounted on light bar support post.


 option-skag,light,soft-2txt.jpg (83964 bytes) 

DRAG toolbox

A large metal toolbox bolted on drag.  Weather resistant, with locking hasps, metal “rings” inside to secure objects with bungy cords.  Dimensions:  6 ft long, 2 ft wide, height sloped from 18" to 16".

drag_toolbox_-1_-web.jpg (62521 bytes)